Quad-Head Displays now supported with IHSE USA’s DVXi Series of KVM Extenders

Monroe, NJ – July 15, 2009 – IHSE USA,LLC, a leading provider of DVI and KVM extender solutions has released their new DVXi Quad-Head Extender for KVM signals over CATx or Fiber. Offered in a 1RU chassis, the DVXi Quad-Head supports a variety of signals including DVI-D, PS2, USB-HID, Audio and RS232. The Quad-Head supports DVI-D video resolutions up to 1920X1200 @60Hz for each channel and includes a loop-through video connection at the local unit for diagnostics or monitoring requirements. Additionally, the DVXi Quad-Head can be configured to support USB 2.0 and/or CWDM fiber optic technology.

For those workstations needing up to four displays per system, the DVXi Quad-Head is the ideal solution. The units are perfect for high end simulation graphics, visualization, command and control or digital signage environments where users are looking for reliability, versatility, and flexibility. The DVXi Quad-Head is easy to install and works seamlessly with our Draco™ line of KVM switcher devices or as a stand-alone extender set. These extenders are designed to carry high-end video, audio, and data over long distances with optimum display quality and, with highly effective compression algorithms, resolutions up to 1920X1200 in 24Bit color are possible for perfect motion video and display imagery. Distances up to 140m can be achieved with CATx or up to 400m with multimode fiber and 10km with singlemode fiber.

The DVXi Quad-Head extension system is comprised of a local unit (Transmitter) located next to the computer or source CPU and a remote unit (Receiver) which is located near the multi-display devices. Up to four DVI-D displays can be supported with one remote unit using up to five dedicated CATx or Fiber cables to connect the two devices. The DVXi Quad-Head package is a complete solution for a single multi-port high-end graphic card. The units also support common keyboard and mouse commands from USB or PS2 type devices as well as full-duplex audio and RS232 data.

For applications where limited fiber optic paths are required, the DVXi Quad-Head can be configured with an optional CWDM transport which reduces the amount of fiber channels from a maximum of ten to only two. Upon receipt of all signals in a MUXED format from the local unit, the remote unit becomes a DEMUX device returning the signals back to their original port without any electronic conversion or signal modifications. All video and KVM signals from the source are transported over individual lightwaves through a singlemode transceiver.

About IHSE
IHSE is a leading manufacturer and innovator in DVI and KVM/Video extension solutions for CAT 5/6/7 and fiber optics. Supporting a worldwide market for commercial and government customers, IHSE products offer solutions for optimal performance in high end graphics for simulations, visualization, SCADA, and other long distance computer interfaces. Since 1984, IHSE has been developing new and innovative ways to support next generation products for video extenders, switchers, and signal management. IHSE provides sales and service through regional resellers and system integrators and is located in Oberteuringen, Germany. For more information, contact us at www.ihseusa.com

The following are trademarks of IHSE, GmbH and its affiliates: Draco™major, Draco™minor and the IHSE USA logo.

# # #

Contact Information for the U.S.
IHSE USA,LLC
info@ihseusa.comThis e-mail address is being protected from spambots. You need JavaScript enabled to view it
www.ihseusa.com
Phone: 732-738-8780

Quad-Head Displays now supported with IHSE USA’s DVXi Series of KVM

Monroe, NJ – July 15, 2009 – IHSE USA, LLC, a leading provider of Digital Video and KVM extender solutions has released their new DVXi Quad-Head Extender for KVM signals over CATx or Fiber. Offered in a 1RU chassis, the DVXi Quad-Head supports a variety of signals including DVI-D, PS2, USB-HID, Audio and RS232. The Quad-Head support DVI-D video resolutions up to 1920X1200 @60Hz (each channel) and includes a loop-through video connection at the local unit for diagnostics or monitoring requirements. Additionally, the DVXi Quad-Head can be configured to support USB 2.0 and/or CWDM fiber optic technology.

For those workstations needing up to four displays per system, the DVXi Quad-Head is the ideal solution. The units are perfect for high end simulation graphics, visualization, command and control or digital signage environments where users are looking for reliability, versatility, and flexibility. The DVXi Quad-Head is easy to install and works seamlessly with our Draco™ line of KVM switcher devices or as a stand-alone extender set. These extenders are designed to carry high-end video, audio, and data over long distances with optimum display quality and with highly effective compression algorithms, resolutions up to 1920X1200 in 24Bit color are possible for perfect motion video and display imagery. Distances up to 140m can be achieved with CATx or up to 400m with multimode fiber and 10km with singlemode fiber. 

The DVXi Quad-Head extension system is comprised of a local unit (Transmitter) located next to the computer or source CPU and a remote unit (Receiver) which is located near the console or multi-display devices. Up to four DVI-D displays can be supported with one remote unit using up to five dedicated CATx or Fiber cables to connect the two devices. The DVXi Quad-Head package is a complete solution for a single multi-port high-end graphic card . The units also support common keyboard and mouse commands from USB or PS2 type devices as well as full-duplex audio and RS232 data.

With a built-in monitoring circuit at the remote unit, the graphic card video drivers are automatically updated at boot up allowing for quick detection of new displays or reconnects.

For applications where limited fiber optic paths are required, the DVXi Quad-Head can be configured with an optional CWDM transport which reduces the amount of fiber channels from eight to only two. Upon receipt of four (five) ports in a MUXED format from the local unit, the Remote unit becomes a DEMUX device returning the signals back to their original port without any electronic conversion or signal modifications. All video and KVM signals from the source are transported over individual lightwaves through a singlemode transceiver.

About IHSE

IHSE is a leading manufacturer and innovator in DVI and KVM/Video extension solutions for CAT 5/6/7 and fiber optics. Supporting a worldwide market for commercial and government customers, IHSE products offer solutions for optimal performance in high end graphics for simulations, visualization, SCADA, and other long distance computer interfaces. Since 1984, IHSE has been developing new and innovative ways to support next generation products for video extenders, switchers, and signal management. IHSE provides sales and service through regional resellers and system integrators and is located in Oberteuringen, Germany. For more information, contact us at www.ihseusa.com

The following are trademarks of IHSE, GmbH and its affiliates: Draco™major, Draco™minor and the IHSE USA logo.

# # #

Contact Information for the U.S.
IHSE USA,LLC
info@ihseusa.comThis e-mail address is being protected from spambots. You need JavaScript enabled to view it
www.ihseusa.com
Phone: 256-850-0669

IHSE USA expands line of DVI + KVM Extenders with DSXi Series

INFOCOMM – June 16, 2009 – IHSE USA, LLC, a leading provider of DVI Extender and KVM extender solutions expands their line of KVM extenders with the new DSXi series for CAT 5/6/7 . These extenders support DVI graphics (DVI-D) in an uncompressed mode at resolutions up to 1920X1200@60Hz. The DSXi comes in both single-head and dual-head models allowing for a wide range of configurations. Additionally, all devices support USB for keyboard and mouse or with our Enhanced USB Emulation software (EUE), devices such as touch screens and multimedia keyboards can be used without loss of performance or functionality.

With true uncompressed transfer of DVI data, the DSXi performs perfectly for video transfer at 1920X1080p/60 without the worry of dropping frames or lose of video quality. The small footprint allows up to five modules in a 1RU space and power to the local units can be supplied from the USB port or from an external power supply. On displays supporting the EDID format, DDC information is pulled directly from the device and stored in the local unit, thus eliminating the need for lookup tables or special emulation mode devices.

These units support a wide range of applications for digital signage, call centers, command and control, information terminals, airport traffic control, and high-end KVM extensions where exceptional image quality is required.

About IHSE, GmbH
IHSE GmbH is a leading manufacturer and innovator in DVI and KVM/Video extension solutions for CAT 5/6/7 and fiber optics. Supporting a worldwide market for commercial and government customers, IHSE products offer solutions for optimal performance in high end graphics for simulations, visualization, SCADA, and other long distance computer interfaces. Since 1984, IHSE has been developing new and innovative ways to support next generation products for video extenders, switchers, and signal management. IHSE provides sales and service through regional resellers and system integrators and is located in Oberteuringen, Germany. For more information, contact us at www.ihseusa.com

The following are trademarks of IHSE, GmbH and its affiliates: Draco™major, Draco™minor and the IHSE USA logo.

# # #

Contact Information for the U.S.
IHSE USA,LLC
info@ihseusa.comThis e-mail address is being protected from spambots. You need JavaScript enabled to view it
www.ihseusa.com
Phone: 732-738-8780

IHSE USA expands line of DVI + KVM Extenders with DSXi Series

INFOCOMM – June 16, 2009 – IHSE USA, LLC, a leading provider of DVI Extender and KVM extender solutions expands their line of KVM extenders with the new DSXi series for CAT 5/6/7 . These extenders support DVI graphics (DVI-D) in an uncompressed mode at resolutions up to 1920X1200@60Hz. The DSXi comes in both single-head and dual-head models allowing for a wide range of configurations. Additionally, all devices support USB for keyboard and mouse or with our Enhanced USB Emulation software (EUE), devices such as touch screens and multimedia keyboards can be used without loss of performance or functionality.


With true uncompressed transfer of DVI data, the DSXi performs perfectly for video transfer at 1920X1080p/60 without the worry of dropping frames or lose of video quality. The small footprint allows up to five modules in a 1RU space and power to the local units can be supplied from the USB port or from an external power supply. On displays supporting the EDID format, DDC information is pulled directly from the device and stored in the local unit, thus eliminating the need for lookup tables or special emulation mode devices.

These units support a wide range of applications for digital signage, call centers, command and control, information terminals, airport traffic control, and high-end KVM extensions where exceptional image quality is required.

About IHSE, GmbH
IHSE GmbH is a leading manufacturer and innovator in DVI and KVM/Video extension solutions for CAT 5/6/7 and fiber optics. Supporting a worldwide market for commercial and government customers, IHSE products offer solutions for optimal performance in high end graphics for simulations, visualization, SCADA, and other long distance computer interfaces. Since 1984, IHSE has been developing new and innovative ways to support next generation products for video extenders, switchers, and signal management. IHSE provides sales and service through regional resellers and system integrators and is located in Oberteuringen, Germany. For more information, contact us at www.ihseusa.com
The following are trademarks of IHSE, GmbH and its affiliates: Draco™major, Draco™minor and the IHSE USA logo.

# # #

Contact Information for the U.S.
IHSE USA,LLC
info@ihseusa.comThis e-mail address is being protected from spambots. You need JavaScript enabled to view it
www.ihseusa.com
Phone: 512-650-IHSE

IHSE USA debuts flexible Repeater / Cross-Repeater for Fiber and CATx Extenders

INFOCOMM – June 16, 2009 – IHSE USA, LLC, a leading provider of DVI and KVM extender solutions will introduce the new DVXi-RCR (Repeater/Cross-Repeater) for the DVXi line of extenders at Infocomm 2009, June 17-19. This single device can be configured as either a basic signal repeater or as a media format converter for either CATx or Fiber. As a repeater, the compact package allows expanded cable length for CATx, Multimode or Singlemode fiber; and, as a cross-repeater, allows for CATx to Multimode fiber, CATx to Singlemode fiber, or Multimode to Singlemode conversion. The DVXi-RCR is configurable as a signal repeater allowing up to twice the normal cabling distance when positioned in the middle of the cable link. When they are used as a paired system, the DVXi-RCR local unit is configured to convert CATx cable links to either multimode or single mode fiber and then returned back to CATx at the remote unit. For applications where mixed fiber cabling is used, a pair of DVXi-RCR units can work as a multimode to single mode converter. This is perfect for applications where singlemode is used between buildings or locations and multimode is used for signal distribution throughout the building.

The DVXi-RCR compliments the wide range of IHSE USA’s DVXi extenders for DVI, KVM, USB, Audio, and Serial data. This device can also be used with the Draco™ family of DVI Switch and KVM switchers and extenders. Devices can be extended up to 280m for CATx, up to 800m for multimode fiber, and up to 20Km for single mode fiber. Up to five devices can be mounted on a 1RU tray.

About IHSE, GmbH
IHSE GmbH is a leading manufacturer and innovator in DVI and KVM/Video extension solutions for CAT 5/6/7 and fiber optics. Supporting a worldwide market for commercial and government customers, IHSE products offer solutions for optimal performance in high end graphics for simulations, visualization, SCADA, and other long distance computer interfaces. Since 1984, IHSE has been developing new and innovative ways to support next generation products for video extenders, switchers, and signal management. IHSE provides sales and service through regional resellers and system integrators and is located in Oberteuringen, Germany. For more information, contact us at www.ihseusa.com

The following are trademarks of IHSE, GmbH and its affiliates: Draco™major, Draco™minor and the IHSE USA logo.

# # #

Contact Information for the U.S.

IHSE USA,LLC
info@ihseusa.comThis e-mail address is being protected from spambots. You need JavaScript enabled to view it
www.ihseusa.com
Phone: 512-650-IHSE

IHSE USA introduces new DXXi series for Dual Link DVI up to 2560X2048

Monroe, NJ – June 1, 2009 – IHSE USA, LLC, a leading provider of DVI and KVM extender solutions introduces the new DXXi Fiber Extenders supporting Dual Link DVI, USB 2.0, and KVM applications. The DXXi Digital KVM extenders offer perfect signal quality without sacrificing image quality. These extenders support DVI-D in an uncompressed mode for resolutions up to 2560X2048 using only two fiber connectors. Up to 1920X1200 or 1920X1080p/60 is supported without compression over a single fiber connector. USB-HID devices are supported for keyboard and mouse as well as touchscreen displays and interactive gaming keyboards. With the addition of a third fiber, full USB 2.0 can be supported with complete bi-directional communications for USB as well as EDID and HDCP for DVI and HDMI devices.

The high density design allows up to three devices to be installed in a 1RU frame. The DXXi supports multimode fiber for distances up to 400m when used with 50/125u multimode fiber. Get uncompressed data transmission for 1080p HDTV video as well as full digital transport of embedded digital audio when it is included with the HDMI device.

An optional DXXi version is available with a built-in KVM switches in the local unit allowing up to two CPU’s to be connected to a single remote unit. With the transparent transmission of DDC information pulled directly from the attached monitor, there is no need to work with look-up tables or EDID emulators – just plug in the selected display and the remote DXXi records the necessary information for bi-directional DDC data.

These units support a wide range of applications for digital signage, call centers, command and control, information terminals, airport traffic control, and high-end KVM extensions where exceptional image quality is required.

About IHSE, GmbH
IHSE GmbH is a leading manufacturer and innovator in DVI and KVM/Video extension solutions for CAT 5/6/7 and fiber optics. Supporting a worldwide market for commercial and government customers, IHSE products offer solutions for optimal performance in high end graphics for simulations, visualization, SCADA, and other long distance computer interfaces. Since 1984, IHSE has been developing new and innovative ways to support next generation products for video extenders, switchers, and signal management. IHSE provides sales and service through regional resellers and system integrators and is located in Oberteuringen, Germany. For more information, contact us at www.ihse.de

The following are trademarks of IHSE, GmbH and its affiliates: Draco™major, Draco™minor and the IHSE USA logo.

# # #

Contact Information for the U.S.
IHSE USA,LLC
info@ihseusa.comThis e-mail address is being protected from spambots. You need JavaScript enabled to view it
www.ihseusa.com
Phone: 732-738-8780

IHSE USA offers compact KVM and DVI packaging with the Draco™ minor

Monroe, NJ – May 20, 2009 – IHSE USA, LLC, a leading provider of DVI and KVM extender solutions announces the introduction of the Draco™ minor product line. Housed in a small throw-down package, this unit provides incredible flexibility for KVM, DVI and USB signal management through an 8 port fiber or CAT 5/6/7 connection. The Draco™ Minor can be configured as a repeater to support up to 7 displays from a single CPU, as a 7X1 KVM single-head switch, as a 3X1 dual head KVM switches for USB and KVM, or as a 4X4 crosspoint switch. Several other combinations of I/O can be configured via dip switch settings. The unit supports up 1920X1200 DVI signals and USB for keyboard and mouse applications. The module can be controlled via an optional IR remote control adapter module. For added flexibility, an optional stereo and serial interface can be added.

The Draco™minor is fully compatible with the full of line of local and remote extenders offered for the larger Draco™ major crosspoint/KVM switcher. The Draco Extender line supports a wide array of DVI, KVM, and USB extension requirements for either CATx, Multimode, or Singlemode fiber. All Draco™ Minor and Major extenders support DVI video access at the local unit as well as single-head, dual-head, or quad-head applications. Additionally, the Draco™ Minor can be configured as a slave unit to the Draco™ Major for extended distribution and signal management.

Each unit can support up to 140m with CATx, 400m with multimode fiber and up to 10km with singlemode cable. The Draco™ minor can be configured to support single-head, dual-head, and quad-head displays. For long haul extenders, the unit supports up to 4 channels of CWDM over a duplex fiber connection. For applications requiring rack mounting, a 1RU mounting tray is available to hold up to 4 units.

Included with each Draco™ Minor is an easy-to-use Java™ browser application supporting quick setup, configuration, and switching requirements.

About IHSE, GmbH
IHSE GmbH is a leading manufacturer and innovator in DVI and KVM/Video extension solutions for CAT 5/6/7 and fiber optics. Supporting a worldwide market for commercial and government customers, IHSE products offer solutions for optimal performance in high end graphics for simulations, visualization, SCADA, and other long distance computer interfaces. Since 1984, IHSE has been developing new and innovative ways to support next generation products for video extenders, switchers, and signal management. IHSE provides sales and service through regional resellers and system integrators and is located in Oberteuringen, Germany. For more information, contact us at www.ihse.de
The following are trademarks of IHSE, GmbH and its affiliates: Draco™major, Draco™minor and the IHSE USA logo.

# # #

Contact Information for the U.S.
Chani Shah
COO
IHSE USA,LLC
info@ihseusa.comThis e-mail address is being protected from spambots. You need JavaScript enabled to view it
www.ihseusa.com
Phone: 732-738-8780

IHSE USA Introduces the “Draco™ major” for KVM and Crosspoint Switching

Monroe, NJ – May 6, 2009 – IHSE USA, LLC, a leading provider of DVI and KVM extender solutions, announced today the immediate availability of the Draco™ major KVM and Crosspoint Switcher. Housed in a compact 2RU frame, the Draco™ major supports up to 32 sources and 16 users. Besides crosspoint switching, the unit can easily be configured to support KVM and USB switching for single-head, dual-head, and quad-head DVI-D displays. Resolutions up to 1920X1200 are supported for single link DVI signals. The unit supports signal connections for CAT 5/6/7, Multimode fiber, or Singlemode fiber.

With a simple OSD (On Screen Display), the unit can quickly be configured to several operation modes supporting applications like classroom environments, command and control, digital signage, or situational rooms. One special feature included in the KVM Switches operational mode includes the “Partnering View” which allows console users to easily select on-screen images and port to other devices like projectors or recorders. In addition, the “Follow-Me” command allows other users to follow whatever on-screen image you are displaying. For digital signage applications, the unit can be configured for up to 32X16 crosspoint switching. The Draco™ major can be configured via the OSD display, via a serial interface, or through a web based graphical interface.

“The Draco™ major is the most flexible KVM/Crosspoint Switcher available”, said Peter Striegel, CEO of IHSE GmbH, “IHSE has supported the KVM markets for 25 years and the Draco™ product line represents our culmination of world-class signal distribution products supporting the latest technologies in DVI, USB, and KVM switching”

IHSE USA offers a wide range cutting-edge technology products for distribution and switching of Video and KVM signals over Cat 5/6/7 or Fiber Optics and the Draco™ major expands our ability to support the growing demand for quality Pro AV products”, stated Chani Shah, COO of IHSE USA.

About IHSE, GmbH

IHSE GmbH is a leading manufacturer and innovator in DVI Switch and KVM/Video extension solutions for CAT 5/6/7 and fiber optics. Supporting a worldwide market for commercial and government customers, IHSE products offer solutions for optimal performance in high end graphics for simulations, visualization, SCADA, and other long distance computer interfaces. Since 1984, IHSE has been developing new and innovative ways to support next generation products for video extenders, switchers, and signal management. IHSE provides sales and service through regional resellers and system integrators and is located in Oberteuringen, Germany. For more information, contact us at www.ihse.de

The following are trademarks of IHSE, GmbH and its affiliates: Draco™major, Draco™minor and the IHSE USA logo.

# # #

Contact Information for the U.S.
Chani Shah
COO
IHSE USA,LLC
info@ihseusa.comThis e-mail address is being protected from spambots. You need JavaScript enabled to view it
www.ihseusa.com
Phone: 732-738-8780